Nanjing Clover Medical Technology Co., Ltd.
Waste Incinerator Manufacturer in China
Call Me
+86-25-8461 0201
Incinerator



Product Description

Principle of the Incinerator equipment is incineration/combustion/burn. Generally, the function is waste treatment for Solid waste, Liquid waste, Gas waste, etc. 
The main body is one combustion chamber (at least), Refractory line or firebrick, Insulation materials and the outer plate. Ignition element is external oil or gas burner. The burner can be medical incinerator yd-500, medical incinerator, 10kg/hour, suppliers, incinerator. COM, medical incinerators capacity calculations, medical incinerators from China, running until waste burnout but for some waste like plastic, paper (sometime, mix coal with waste before feeding), they can combustion itself after Ignition. During combustion, burner has a fan itself for Oxygen supply and also protect burner avoid heat damage from combustion chamber. And, there a external fan blow air into combustion chamber. The Exhaust gas blow out after combustion. 

Considering Environmental Protection requirements and rules, almost all incinerator have secondary combustion chamber (after-burn, post-combustion), even if third combustion chamber. The secondary burner burn the Exhaust gas from primary combustion chamber, this technology make sure sufficient combustion, few black smoke and smell. 
The updated incinerator technology focus on Exhaust gas treatment to remove Hazardous material and other function from incinerator, like heat recovery (waste to energy), save fuel cost, PLC Automation operation. 
In some Developed countries, some new waste treatment method like High-temperature cooking, waste carbonization, crushing sterilization technology is instead of incineration technology.

Items/Model TS100(PLC)
Burn Rate 100 kg/hour
Feed Capacity 200 kg
Control Mode PLC
Combustion Chamber 1200L
Internal Dimensions 120x100x100cm
Secondary Chamber 600L
Smoke Filter Chamber Yes
Feed Mode Manual
Voltage 220V
Power 0.7Kw
Oil Consumption (kg/hour) 14--28
Gas Consumption (m3/hour) 10--32.2
Temperature Monitor Yes
Temperature Protection Yes
Oil Tank 200L
Feed Door 80x60cm
Chimney 10Meter
Chimney Type Stainless Steel
1st. Chamber Temperature 800 degree --1000 degree
2nd. Chamber Temperature 1000 degree -1200degree
Residency Time 2.0 Sec.
Gross Weight 6000kg
External Dimensions 260x150x180cm
 


+86-25-8461 0201
Nanjing Clover Medical Technology Co., Ltd.
Fax: +86-25-8461 0201
Website:www.cloverepe.com
Email:cloverincinerator@gmail.com
After Service
1.One year warranty on incinerator and parts in stock.
2.Local Distributor services in specific countries.
3.Within 48 Hours technical response.
Copyright  CLOVER Environmental Protection Equipment  2016